07-03-2002 04:40 AM - edited 03-01-2019 11:27 PM
When I type enable ( Enter ) from user mode to try and enter privileged mode
on an acesspro card I get this response ( % No password set ) and I'm
returned to user mode. Any suggestions. I just picked up this card off
of ebay so I'm not sure whats been done to it. Its running IOS 11.3 (11a).
Seems strange to me since if no password is set I should be allowed
in. The only thing I can think of doing is treating the problem as a lost password and taking the appropriate action but I'll wait first to see if anyone
has more insight into the matter
07-03-2002 09:31 PM
Are you on a telnet session or a console session? If you are on a telnet session what you are seeing is normal. Try consoling in
07-04-2002 07:21 PM
Its a console session
07-08-2002 05:14 AM
Prob. is solved. Cockpit error by me. I was trying to console in via the aux port
which is one of the rj45 ports on the card. I now know you have to set up a terminal session via com 2 ( the default by way of the jumper settings on the
card ) thru the PC. I've got the card installed in a CPQ 486 PC running
98. I used hyper terminal to console in. Its seems like an unusual way to set
it up, but it works.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: