Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Undersize Errors

Hey all. We are we having some hard to pinpoint errors on our net, so I tried "sho int count err". I am getting many (probably 100 or so a minute) undersize errors on the 3560 port that connects to my 2801. Anything to worry about? (Our errors are entirely data related, see my other thread "3560s Letting me Down!")

1 REPLY
Silver

Re: Undersize Errors

Referring to Cisco doc.:

Undersize Packets

The total number of packets received of less than 64 bytes that have good FCS values.

Another one

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00800a7af0.shtml

Undersize error

This is an indication of a bad frame generated by the connected device.

What is the interface status at 2801.

734
Views
0
Helpful
1
Replies
CreatePlease to create content