i am using sniffer to sniff traffic on a port which is a part of vlan and surprisingly i am able to see all unicast traffic on the other ports as if switch behaving like a hub for this vlan can some body clarify please
You may not see all unicast traffic. Unknown unicast are initially flooded before the switch learns the mac address. Also you have assymetric routing in your network, you would see it all the time till you fix it.
Assymetric routing is packet travels to a PC through one router/switch and the return packet goes to a different router/switch.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...