Re: unreadable character after authenticating in via dial up on
When we dial using the post dial up window & connect, it's an exec session untill we hit the cntrl 7 or done button..... the NAS (into which we dialin) when configured for dedicated PPP connection, we start seeing garbage on the screen since the NAS is sending LCP packets out towards the dailin client.
By hitting cntrl 7 or done we are basically transfering the exec session to the PPP stack on the PC operating system...from there on the NAS & the client PC negotiate PPP.
On the NAS if we configure "autocommand ppp" under the lines then we will negotiate ppp.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...