Unsupported device in CW2000 - RME 3.4 IDU 1.0 - OID not listed on Cisco

[treisner]

Have a device that was added. Can do SNMP pulls and the OID that comes back is:

system.sysObjectID.0 : OBJECT IDENTIFIER:

.iso.org.dod.internet.private.enterprises.cisco.ciscoProducts.502

(Interpreted, this OID is: 1.3.6.1.4.1.9.1.502)

I tried the OID translator on cisco.com and it does not have a 502.

The system description was:

system.sysDescr.0 : DISPLAY STRING- (ascii): Cisco Internetwork Operating

System Software

IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(14)E1,

EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Anybody run into this?

[rmushtaq]

Using: http://jaguar.ir.miami.edu/cgi-bin/snmptransc.cgi, the above OID translates to cat4506 which is supported in the latest IDU:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/cw2000e/e_3_x/3_4/dev_sup/e3_4.htm#13062

You can download the latest IDU v4-0 from: http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme and install.

[treisner]

I did get a "sh tech" from the system and it shows that it is a Cat4506 - I did find that support for it was included in IDU 2.0.

Thanks for the responses.