If you can CW2K Campus Manager, then you can launch Topology Services, select the device->Port Attributes->Unused Ports. Alternately, portAdditionalOperStatus from CISCO-STACK-MIB. For XL switch c2900PortStatus from CISCO-C2900-MIB can be used in a script for this.
It tells me that the port is up or down (If Im looking in the right bit). Which is very useful but not what I need - the machine may just be switched off. If I look at the port in question its marked as down, but traffic has passed through the interface. If I look at a port thats never been used it is also marked as down but no (or little) traffic has passed through it.
Ideally what is need is a utility/script that checks traffic and the port status.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.