Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrade Catalyst 4006 Software ?

Hello ,

i want upgrade our Catalyst 4006 SUP III to the new release

actually :

Cisco Internetwork Operating System Software

IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(8a)EW, R

ELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Thu 24-Jan-02 17:34 by ccai

Image text-base: 0x00000000, data-base: 0x00AA2B8C

ROM: 12.1(8r)EW

CISCO_ITZ_I uptime is 41 weeks, 4 days, 4 hours, 0 minutes

System returned to ROM by reload

System restarted at 09:14:10 etc Sat Apr 19 2003

System image file is "bootflash:cat4000-is-mz.121-8a.EW.bin"

cisco WS-C4006 (MPC8245) processor (revision 7) with 262144K bytes of memory.

Processor board ID FOX060106HD

Last reset from Reload

4294967295 Ethernet/IEEE 802.3 interface(s)

32 Gigabit Ethernet/IEEE 802.3 interface(s)

467K bytes of non-volatile configuration memory.

Configuration register is 0x2102

Mod Ports Card Type Model Serial No.

----+-----+--------------------------------------+-----------------+-----------

1 2 1000BaseX (GBIC) Supervisor Module WS-X4014 JAB06050AJF

2 6 1000BaseX (GBIC) WS-X4306 JAE060404QU

3 6 1000BaseX (GBIC) WS-X4306 JAE061102Y2

4 6 1000BaseX (GBIC) WS-X4306 JAE061103GG

5 6 1000BaseX (GBIC) WS-X4306-GB JAE0635016G

6 6 1000BaseX (GBIC) WS-X4306 JAE04510156

cat4000-is-mz.121-13.EW2 or higher.

But the upgrade fails. After copy the Image ,and restart the Switch goes to the rommon . When i start the boot in the rommon with "boot bootflash:cat4000-is-mz.121-13.EW2

the Display output shows the following message

rommon to old .... ( sorry i don't have the exact message )

Is it nessecary to upgrade the rommon , and how can i do that ?

I can't find any hint in the Web .

Thanks for any hints

regards

Hermann

2 REPLIES
Bronze

Re: Upgrade Catalyst 4006 Software ?

you are right. You need to upgrade the rommon.

Procedure can be found in the cat4500 release notes.

Upgrading ROMMON

URL: http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_release_note09186a00800aded7.html#56879

Upgrading Cat4500 IOS release

URL:

http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_release_note09186a00800aded7.html#71926

New Member

Re: Upgrade Catalyst 4006 Software ?

Hello ,

thank you for your hint. I always look at the Cat4000 release notes.

regards

Hermann

210
Views
5
Helpful
2
Replies
CreatePlease login to create content