cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1409
Views
0
Helpful
14
Replies

Upgrade IOS catalyst WS-C4507R

edavila01
Level 1
Level 1

Hola necesito realizar el upgrade de un equipo catalyst WS-C4507R que actualmente tiene ROM: 12.1(12r)EW y bootflash:cat4000-is-mz.121-13.EW1.bin

La pregunta es que si con el

cat4500-ios-promupgrade-122_31r_SG3 puedo actualizar el IOS a cat4000-i5s-mz.122-20.EW1.bin, por su atencion, gracias.

1 Accepted Solution

Accepted Solutions

Documentacion sobre que ?

Como le dije inicialmente, la version que vas a usar a sido categorizada como DF por Cisco.

Como ya la tienes en el flash, usa el bootprom que se aproxima a esa version.

View solution in original post

14 Replies 14

Edison Ortiz
Hall of Fame
Hall of Fame

Hola,

No es necesario actualizar el ROM cuando actualizas el IOS, pero si tienes tiempo es recomendable.

El 12.2-20EW1.bin ya esta descontinuado, y te recomendio bajar uno mas reciente.

Por favor indica con un voto se te he ayudado

Gracias.

no actualice el ROM y no tomo la version del IOS, por eso es la pregunta de que promupgrade es recomendable y que se encuentre en el site para la actualizacion del IOS cat4000-i5s-mz.122-20.EW1.bin

No entiendo que no tomo la version de IOS. Entonces tu hiciste el TFTP y te salio un error ?

Puedes incluir la informacion de

SH BOOTVAR

y

DIR /ALL

SWITCH_4500_1#sh bootvar

BOOT variable = bootflash:cat4000-i5s-mz.122-20.EW1.bin,12

CONFIG_FILE variable does not exist

BOOTLDR variable does not exist

Configuration register is 0x2102

Standby BOOT variable = bootflash:cat4000-i5s-mz.122-20.EW1.bin,12

Standby CONFIG_FILE variable does not exist

Standby BOOTLDR variable does not exist

Standby Configuration register is 0x2102

SWITCH_4500_1#dir all

Directory of bootflash:/

1 -rw- 8620304 Apr 04 2002 18:54:05 cat4000-is-mz.121-13.EW1.bin

61341696 bytes total (30032024 bytes free)

Directory of crashinfo:/

1 -r-- 8593 data

2 -r-- 81916 data.bin

No space information available

Directory of cat4000_flash:/

1 -rw- 3556 vlan.dat

524260 bytes total (520704 bytes free)

Directory of nvram:/

395 -rw- 10117 startup-config

396 ---- 99 private-config

1 -rw- 0 ifIndex-table

413676 bytes total (402384 bytes free)

Directory of slavenvram:/

392 -rw- 10117 startup-config

393 ---- 99 private-config

1 -rw- 0 ifIndex-table

413676 bytes total (402384 bytes free)

Directory of slavebootflash:/

1 -rw- 8620304 Apr 04 2002 19:09:34 cat4000-is-mz.121-13.EW1.bin

2 -rw- 11344492 Jul 18 2006 12:24:18 cat4000-i5s-mz.122-20.EW1.bin

61341696 bytes total (41376644 bytes free)

Directory of slavecat4000_flash:/

1 -rw- 3556 vlan.dat

524284 bytes total (520728 bytes free)

Directory of slavecrashinfo:/

1 -r-- 86 data

2 -r-- 81916 data.bin

No space information available

Directory of system:/

2 dr-x 0 memory

1 -rw- 28668 running-config

9 dr-x 0 vfiles

No space information available

Directory of profiler:/

1 -r-- 0 data

No space information available

SWITCH_4500_1#

Ya veo el problema. Tu tienes la configuracion indicando que el archivo esta en bootflash pero esta en slavebootflash

Directory of slavebootflash:/

1 -rw- 8620304 Apr 04 2002 19:09:34 cat4000-is-mz.121-13.EW1.bin

2 -rw- 11344492 Jul 18 2006 12:24:18 cat4000-i5s-mz.122-20.EW1.bin

Copia el archivo desde slavebootflash at bootflash y rebuteas el switch.

#copy slavebootflash:cat4000-i5s-mz.122-20.EW1.bin bootflash:

Por favor indica con un voto si te he ayudado.

Gracias

En un inicio copie la cat4000-i5s-mz.122-20.EW1.bin en bootflash y slavebootflash. Reinicie el equipo y automaticamente se elimino la imagen de bootflash.

Es por eso que suponia que se debe actualizar el promupgrade para actualizar el IOS

Primera vez que veo eso. Bueno, entonces te recomendio que hagas el upgrade de ROM and despues copias el archivo de slave a boot

La pregunta es: Cual de los siguientes promupgrade cat4500-ios-promupgrade-122_31r_SG3 o cat4000-ios-promupgrade-122_20r_EW1me. Me sirve para la actualizacion de IOS de la version cat4000-is-mz.121-13.EW1.bin a la version cat4000-i5s-mz.122-20.EW1.bin

Arrr... someone please help to translate the converastion to English... I can't understand. ;)

The question is: As of following promupgrade cat4500-ios-promupgrade-122_31r_SG3 or cat4000-ios-promupgrade-122_20r_EW1me. Supports to the upgrade of IOS of the version cat4000-is-mz.121-13.EW1.bin to the version Cat4000-i5s-mz.122-20.EW1.bin

Use this one

cat4000-ios-promupgrade-122_20r_EW1me

since it's the closest match to the intended IOS.

Please rate helpful posts.

Thanks

By I complete you please have some documentation on this subject

Documentacion sobre que ?

Como le dije inicialmente, la version que vas a usar a sido categorizada como DF por Cisco.

Como ya la tienes en el flash, usa el bootprom que se aproxima a esa version.

Thanks for the translation.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: