Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrading 3750 to 12.2(25)SED1 with no .tar files

The Release Notes for 12.2(25)SED and above describe the software upgrade process using .tar files. However, when I go through the software selector, all I'm offered is .bin files. Can I just make a directory and TFTP the appropriate .bin into it? Are there no longer all the HTML files, etc., that used to come in the .tar package?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Upgrading 3750 to 12.2(25)SED1 with no .tar files

Hi,

When you access CCO IOS for the 3750, you will need to check which software feature set you want. The tar files are disguised as 'Web Based Dev Mgr'

Bill

4 REPLIES
Purple

Re: Upgrading 3750 to 12.2(25)SED1 with no .tar files

If you just use the IOS to configure and manage the switch you don't need the tar file , just download it into flash and set the boot statement.

New Member

Re: Upgrading 3750 to 12.2(25)SED1 with no .tar files

That's what I thought, but I'd like to know where the full .tar package is, anyway. One of these days we'll probably start looking at the HTML wizadry for network management, but for now I'm a CLI purist.

New Member

Re: Upgrading 3750 to 12.2(25)SED1 with no .tar files

Hi,

When you access CCO IOS for the 3750, you will need to check which software feature set you want. The tar files are disguised as 'Web Based Dev Mgr'

Bill

New Member

Re: Upgrading 3750 to 12.2(25)SED1 with no .tar files

Clever devils; thanks -- I should have known.

204
Views
0
Helpful
4
Replies
CreatePlease login to create content