I am upgrading a 2950 to c2950-i6q4l2-tar.121-13.EA1b.tar. I have downloaded and have up to 5242880 free after I deleted the html directory. I then extracted the file above but as soon as it gets to the help.sgz under the html, it always crashes out. I have done this twice now. The file size of c2950-i6q4l2-tar.121-13.EA1b.tar is 4,878,336 so there should be more than enough space but it crashes out and does not verify.
WHat else can I do?
Directory of flash:/
2 -rwx 2487439 Mar 01 1993 00:02:51 c2950-i6q4l2-mz.121-9.EA1d.bin
Thank you so very much. Everything worked and it is fine. The reson why it was bumping out was because there was not enough space so I had to delete most of the files in the flash and then it was fine.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...