We are looking to move to a high bandwidth WAN with either sonnet or DS3. We currently are frame-relay and T1. We have a central hub which is a 3620 router to host the majority of the connections. We would like to consolidate and have one router with all wic-1dsu cards in it. We would like to get rid of all the serial connections and external dsus. We were looking into one of the 3700 series routers cause its time to upgrade our 3620. What would be the best road to take in regards to upgrading and consolidating all the connections.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...