09-25-2002 01:19 PM - edited 03-02-2019 01:38 AM
Has anyone had experience moving blades from a 6509 chasis to a 6513. If so, can you retain the configuration of the 6509 (lots of VLAN and port configuration). Will the SUP modules from the 6509 work in the 6513? What is the best migration process ? Can we simply move the modules to the same slots in the 6513 and tftp the config?
Thank you
09-25-2002 05:12 PM
What kind of Supervisor do you have in your 6509? 6513 chassis is supported with Supervisor Engine 2 only and the minimum cat OS requirement is 6.2(2)The best code to run would latest 6.3(x)
You shoud be able to move your regular ethernet/gig ethernet modules without any issues. If you have a SFM module in 6509, you'll need SFM2 for 6513
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/confg_gd/swfab.htm
09-25-2002 07:32 PM
SUP2's with MSFC2's.
Thanks for your Reply
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide