Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Upgrading from a 6509 to a 6513

Has anyone had experience moving blades from a 6509 chasis to a 6513. If so, can you retain the configuration of the 6509 (lots of VLAN and port configuration). Will the SUP modules from the 6509 work in the 6513? What is the best migration process ? Can we simply move the modules to the same slots in the 6513 and tftp the config?

Thank you

2 REPLIES
Cisco Employee

Re: Upgrading from a 6509 to a 6513

What kind of Supervisor do you have in your 6509? 6513 chassis is supported with Supervisor Engine 2 only and the minimum cat OS requirement is 6.2(2)The best code to run would latest 6.3(x)

You shoud be able to move your regular ethernet/gig ethernet modules without any issues. If you have a SFM module in 6509, you'll need SFM2 for 6513

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/confg_gd/swfab.htm

New Member

Re: Upgrading from a 6509 to a 6513

SUP2's with MSFC2's.

Thanks for your Reply

71
Views
0
Helpful
2
Replies
CreatePlease to create content