Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrading My IOS Image

How can I get an IOS image for the CISCO 2621 router,capable of supporting encapsulation on the subinterfaces I create.Do I download this and if so show me the site with the installation instructions.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Upgrading My IOS Image

The entire procdure include where to get the software image is all located on the following webpage:

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00801fc986.shtml#bckc2

Keep in mind you will need a valid CCO account in order to download software.

Steve

2 REPLIES
Silver

Re: Upgrading My IOS Image

The entire procdure include where to get the software image is all located on the following webpage:

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00801fc986.shtml#bckc2

Keep in mind you will need a valid CCO account in order to download software.

Steve

Silver

Re: Upgrading My IOS Image

To start with, what version of IOS are you running? You can also post your configuration.

To download software and access additional information you'll need a Cisco.com login. Based on your support contract you are entitled for software updates.

Because of vulnerbilities in IOS you can approach Cisco TAC for new software image. You'll need to supply the S/N of your router.

Search for "Heap-based overflow" on Cisco.com for more information

100
Views
0
Helpful
2
Replies
CreatePlease login to create content