Just wanted to ask if this anything to be aware of in upgrading a WAN card from v.34 (attached to a channel bank) to a full WICT1 card? All IP schemes are the same, same encap, etc. just different clock speed (set by my ISP). I know this is an easy change, but I can't try this swap on a test machine first. I have to do it (in about 15 minutes) on a production router (2611) with 25 corporate websites temporarily down. I just want to get this planned out so I can do the change over as quickly as possible.
I've seen WICs do odd things every now and again. I hope it goes well.
Be sure that the T1 that connects to the WIC is not using sealing current. WICs don't deal with it well. Also, WICs' clocking can get out of sync if multiple WICs on the same router are connected to different clocking sources.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.