Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Upgrading WS-C6006 to Sup 720's

We have a customer that ordered new Supervisor 720's blades for his 6006 chasiss...the current switch is Layer 2 only, the new sup's will be running an MSFC...my main question is, will the "WS-C6006" accept these new Supervisor modules; also will they/can they run Sup-2 blades? Thanks for any replies!!!

3 REPLIES

Re: Upgrading WS-C6006 to Sup 720's

Hi Friend,

AFAIK 6006 chassis does not support sup 720. You need atleast 6500 chassis to support sup 720.

Yes cat6006 chassis support sup2.

HTH, if yes please rate the post.

Ankur

Re: Upgrading WS-C6006 to Sup 720's

Hi

I'm afraid the SUP-720 is not compatable with the 6000 series, only 6500 & 7600 series.

Chassis compatibility

• Cisco 6503, 6503-E, 6404-E, 6506, 6506-E, 6509, 6509-E, 6509-NEB, 6509-NEB-A, 6513

• Cisco 7603, 7606, OSR-7609, 7609, 7613

Supervisor 2 will go into a 6006.

Martin

Community Member

Re: Upgrading WS-C6006 to Sup 720's

Thanks for both of these replies!!!!!

143
Views
20
Helpful
3
Replies
CreatePlease to create content