We have recently installed another network on our router, we have a 10.0.0.0 class A address, and a 10.74.1.0 class c address set up on my router. the dhcp server on the 10.74.1.0 network is offering requests onto our 10.0.0.0 network, how would I stop this ?
What is the request message that the DHCP server is sending?to get this background operation,check the debug output.Because, there are several dhcp messages sent between server and client such as informs, discover etc.Based on the request message, we can disable or enable a particular command.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...