Re: Urgent Help wanted with Blocking DHCP requests - cut myself
It looks as though you will most definitely need to reboot the router to undo the changes. However, if you are able to connect via a console port, look at what data was entered. I'd almost be willing to bet that only the first line of your acl is actually in the router. If you can get in, do a no ip access-group 103 in on both your interfaces. Then create the access list. And then reapply it to your interfaces. if you have to reboot (hopefully changes before this last one were saved.) you should be able to enter your access-list first and then apply. Don't forget your permit any any line, or you'll be hosed. I hope this helps.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.