Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

urgent: Is Catalyst 40006 PEM hot pluggable?

Hi

We need to install Catalyst 4000 Family Power Entry Module (PEM). Do we need to power down the switch?

Is it hot pluggable?

Thanks in advance

3 REPLIES

Re: urgent: Is Catalyst 40006 PEM hot pluggable?

hi

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/hw_doc/cn11189.htm

in this link they have mension in caution to remove the external power before installation...

may this helps you

rate the post if it helps

regards

Devang

Community Member

Re: urgent: Is Catalyst 40006 PEM hot pluggable?

Hi

It says 'Ensure that the external power supply is disconnected from the power source before you install and connect it to the PEM.'

It seems to be we need to disconnect the external power for the PEM only. Do we need to disconnect the existing AC connections? i.e. do we need to shut down the switch?

Thanks

Re: urgent: Is Catalyst 40006 PEM hot pluggable?

NO, you need to make sure that the PEM is disconnected from external power, you do not need to power down the three other PS in the chassis.

Please rate helpful post.

115
Views
5
Helpful
3
Replies
CreatePlease to create content