cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
295
Views
0
Helpful
2
Replies

URGENT: problem with QDM 2.1.(2) on Cisco 1720 with 12.2(5) IOS (c1700-k9sy

fisko
Level 1
Level 1

Hi!

I have a problem with QDM 2.1(2) on our Cisco 1720 router with IOS =

12.2(5) (image c1700-k9sy-mz.122-5.bin).

This router is in the list of supported routers for QDM 2.1(2).

I have followed the correct procedure to install QDM, including copying

from tftp to flash, setting correct user rights and 16 VTY lines.

When I try to access QDM over http, QDM page and applet is dowloaded but I

are unable to see interfaces on the router. I can setup policies, but

I cannot see them in qdm. I acces the running configuration from QDM

and run CLI to setup QOS. Also, after a while I get a "QDM was unable

to establish connection with xx.xx.xx.xx" (where xx.xx.xx.xx is IP

address of our router). In java console we can monitor qdm applet trying

to connect to our router:

%INFO: Starting QDM application...

%INFO: Connecting to xx.xx.xx.xx

%INFO: Unable to recognize, skipping >>>>> Date: Mon, 01 Mar 1993 =

00:33:49 UTC

%INFO: Connecting to xx.xx.x.xx

%INFO: Unable to recognize, skipping >>>>> Date: Mon, 01 Mar 1993 =

00:33:59 UTC

Also I was sniffing traffic between IE and router, and we found 404 = errors for the following files:

/com/cisco/qdm/adBeanInfo.class

/com/cisco/qdm/QDMAppletBeanInfo.class

I checked, and these files are missing from the qdm.tar and qdm.jar.

My client is IE 6.0 with MS JavaVM (Java and JavaScripts are enabled).

Can you help me or point us to the right direction.

Tnx

Best regards,

Enes Ajanovic

2 Replies 2

smahbub
Level 6
Level 6

Hi,

I remember someone in this forum saying that QDM does not support logical interfaces like PPP multilink and interleaving. You may want to check on that aspect for not seeing your interfaces in the QDM.

Not sure why you are having other issues. Did anyone face this kinda problems. Would appreciate if you can help.

Problem is that i can not see any interface in my router.I do the same thing in Cisco 3640 and it is working great.

Definitely Cisco 1720 with this IOS does not support Ciscos QDM 2.1(2).

Regards

Enes Ajanovic

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: