URL to download the IOS installer?

[nkelley]

I switched/formated PCs and I no longer have the IOS updater utility. I can always tftp it over, but I liked dumping new images through the serial port from time to time.

Any help is appreciated.

[jmia]

Hi -

If I'm reading this correctly, I think you require the following document:

http://www.cisco.com/warp/public/130/xmodem_generic.html

Hope this helps -

[nkelley]

Thanks for the link - that may be useful too.

What I really need is the software used to load new images onto a router. When you purchase an image from Cisco they give you this tool on CD-ROM. I can't seem to find the CD and I've since reformated changed PCs so I lost what I had installed.

What do you generally use to load an Image on your routers from your PC? The tool I'm thinking of required you to console into the router and then you connected an ethernet port to it to dump the image out.

This was a very simple process and didn't require me to startup a tftp server everytime I wanted to do this.

[thisisshanky · Accepted solution]

Are you looking for the Router Software loader ?

http://www.cisco.com/pcgi-bin/tablebuild.pl/rsl

[thisisshanky]

More info on how to use RSL can be found at

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/fp113rn/cdintro.htm