I am planning to Implement URT in My network. I configured URT Version 2.5.1, Cisco Switch 3550 and VPS 1101. Client systems are windows 2000 Professional. User is able to Login and he gets his VLAN and Ip address properly. But when the user Log off and an another user try to Login, or if the same user try to relogin, he is not able to get either his VLAN or IP address.At this point URT.bat Script is not running.
Can any one please explain how to solve this problem
what IP Address has the PC after logoff ? Is it in the logon VLAN or has it a Windows dummy IP (168.X.X.X). After logoff the IP address of the switch port looses its VLAN. I have changed the timer so the switch port will be in the vlan for about 20 seconds after logoff, so the client can finish its work on the network.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...