Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Use 2503/2513 to sharing broadband sharing

How to use 2503/2513 for sharing broadband Internet access that is one gateway with NAT for all the local client PCs to share one local IP address for pppoe connection.

I check the ethernet port with one command "pppoe enable" only, nothing I know to bring up the connection with my LoginID and Password......

1 REPLY
New Member

Re: Use 2503/2513 to sharing broadband sharing

If I am reading your question correctly, you will not be able to use two routers to share the same Internet connection. If you are trying to set up the two routers for redundency then you should set up HSRP on the routers. The following gives an example of HSRP http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12112cea/3550scg/swhsrp.htm.

90
Views
0
Helpful
1
Replies
CreatePlease login to create content