User Tracking not discovering IP addresses and hostnames
After replacing the 5505 w/RSM core switch with a 6509 w/MSFC2, User Tracking is not discovering hostnames and IP addresses within that VTP domain. It still discovers hostnames and IP addresses in other VTP domains at other sites including those with 6509/MSFC core switches. Also, the Topology Services has a '?' in the icon for the MSFC2's. CRME discovers the MSFC2's as Generic SNMP devices.
My CiscoWorks for NT is using Campus Manager 3.0 and I have installed the update package for Cat6000 for CiscoView. CiscoView now sees everything in the switch Ok including the MSFC2's. CRME version is 3.1
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...