When I add a new cisco catalyst 4006, the MAC address comes in but only via uplink of the seed switch. Then, I reinitialize the database and restore. This is when I get the actual switch with proper ports. Do I have to reinitialize the database every time a node is newly installed?
UT gets it's info from Campus Manager's database. If you add a new switch as a seed device then the Campus Manager has to first run a new discovery to get the info from the seed device(s). Once it completes, if you have Ping Sweep enabled in UT, then you can run a new UT discovery by using Discover All to see if it picks upi the new info or not.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...