Not sure if you have already seen: http://www.cisco.com/warp/public/477/Campus/ani.shtml which you can look at first to see if you're not missing anything here. This feature is helpful when a change occurs that might affect users or hosts on a specific device, you can initiate a discovery for only that device. This is less time-consuming than rediscovering all users and hosts. For example, if a host has been moved to a new device port, assigned to a new VLAN, or moved from one switch port to another, use device discovery to identify affected users and hosts.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...