Using Dialer-Profiles and NAT

[admin_2]

can i share a E1 Interface into two logical dialer interfaces to run 'nat outside' on dialer0 i.e. and 'nat inside' on dialer1?

[#2]

Yes.

interface serial 0:15

no ip address

dialer pool-memeber 1 max-link 15

dialer pool-memeber 2 max-link 15

!

interface dialer 1

dialer pool 1

ip nat inside

!

interface dialer 2

dialer pool 2

ip nat outside.

It shoudl work just fine.