Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using MLS with Supervisor II +MSFC2

All,

I have used MLS in the past with Supervisor 1A +MSFC on the 6500 series.

Can I use MLS with Supervisor II + MSFC2, or do I have to use CEF, along with DFC Daughtercards? I do not intend to use Switch fabric modules at this time, and would like to retain Hybrid CatOS/IOS functionality...

Regards & thanks in advance,

Mike O'Sullivan

2 REPLIES

Re: Using MLS with Supervisor II +MSFC2

Mike,

MLS is and automated function on SUP2 with MSFC2 there is no extra need to configure it at all, also CEF cannot be disabled on SUP2.

If you have DFC cards you will have to go the IOS route and also will need the SFM.

Regards

Cisco Employee

Re: Using MLS with Supervisor II +MSFC2

Sup2/MSFC2 does CEF and is not a configurable option.

84
Views
0
Helpful
2
Replies