I am looking for information about Nat configurations. Basically what I have is 5 class c address ranges. I want to know if the is a way to do a 1-1 ratio using a class b address (ie 10.10.x.x)
The first 1273 addresses would be 1-1. I would like the last routable address to resolve to the rest of the non-routable class b (1-many) I have found some info but nothing pertaining to exactly what I want. Any information would be helpful. Thank you
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...