I wonder if anyone can help me with this issue. I am testing PoE splitters with 3750 switches. I have a device which does not support PoE and the splitter enables me to take power from the switch. Only it dosn't. I am using a sparklan E-100 splitter which claims to conform to the IEEE standard. When attached there is no response from the switch at all.
Thanks guys. I have tested the ports are working by plugging in Cisco AP1020 which work fine. I have also tried attaching the unit (its a tv set top box)to a power souce to try and kick start some POE but to no avail.
It transpires that the E-100 is not compliant as the web page states. There's a POE-100 that is compliant and that's the one I should be testing. I'll leave a post to let you know if it works - if anyone's interested!
what are you trying to power and what voltage and current do you need. If your device will work at 18VDC and 350 ma you can try the PD-AS-601/18 that is 802.3af compatible and was described in thw white papaer below as
The PowerDsine PD-AS-601/18 Active Splitter (18 Volts) can be used with the Cisco Aironet AIR-PWRINJ-BLR2T (12 to 40 VDC) transportation power injector to power the Cisco Aironet 1300 series access point or bridge from a non-Cisco IEEE 802.3af power source
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.