I know the L3 card has G1/G2 which are the external ports and then G3/G4 which are the backplane ports. What I am wondering is if I can do any sort of trunking or something to use a couple of those Cat 5 ports in the layer 3 card, or like trunk G3 to a couple of the ports, I need to connect the switch to a couple layer 3 devices and I dont have fiber to do it with.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...