Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using the AUX port for remote access backup

I am trying to set up our remote site routers (3640's) so that I may connect to them via dial in on the AUX port in the event of a network outage. I am using the following basic script which gives a connection (according to MS Hyperterminal)but will not offer up the login to gain access - am I missing something :

line aux 0

exec-timeout 0 0

password <current psw>

modem autoconfigure discovery

transport input all

stopbits 1

speed <have tried various>

flowcontrol hardware

login

2 REPLIES
New Member

Re: Using the AUX port for remote access backup

Hi,

I guess you missed the following parmeters

line aux 0

login

password xxxx

autoselect during-login

Hope this helps.

regds,

d.k

New Member

Re: Using the AUX port for remote access backup

modem inout

that might help.

Josh

99
Views
0
Helpful
2
Replies
CreatePlease login to create content