Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vbr-nrt on one sub-interface w/PVC#1 and ubr on another sub w/PVC#2

Hi all,

With this kind of config:

interface ATM3/0

no ip address

no ip route-cache

no ip mroute-cache

atm clock INTERNAL

atm scrambling cell-payload

atm framing cbitplcp

atm uni-version 3.1

no atm ilmi-keepalive

no atm address-registration

!

interface ATM3/0.1 point-to-point

description (VBR-nrt to Paris 1.5Mbs)

ip address 20.0.0.1 255.0.0.0

no ip directed-broadcast

pvc 1/100

protocol ip 20.0.0.1 broadcast

protocol ip 20.0.0.2 broadcast

vbr-rt 424 424 5

!

interface ATM3/0.2 point-to-point

description (UBR to Paris)

ip address 30.0.0.1 255.0.0.0

no ip directed-broadcast

pvc 1/101

protocol ip 30.0.0.1 broadcast

protocol ip 30.0.0.2 broadcast

How can prioritize one interface over the other, what I want to do is send my corporate traffic over the vbr-nrt and the rest (Internet and all) over the UBR.

Thanks.

2 REPLIES
Cisco Employee

Re: vbr-nrt on one sub-interface w/PVC#1 and ubr on another sub

policy-routing should help you achieve that.

New Member

Re: vbr-nrt on one sub-interface w/PVC#1 and ubr on another sub

Could you be a little bit more specific or point me to some examples?

Thanks

86
Views
0
Helpful
2
Replies
CreatePlease login to create content