first of all you can not have priority like this... priority mustbe the multiple/divisor of 2 so you can have priority of 8192 instad of 8130... and by changing the priority of the VLAN you are trying to determine root bridge by your own... you can use the multiple different priority value in order to obtain the load sharing kind of topology in switching network...it means you are selecting the different root bridge: like one swithc will be a primary root bridge for one vlan and other switch will become a secondary root switch for other vlan...
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...