Does anyone know if there is a mib available for the new Catalyst "show vlan counters" command introduced in 12.1(13)E? Since this revision, a customer of mine has found the "show interface vlan" information to be wrong but the "show vlan counters" to be correct. The problem is he can't view this info via snmp.
Thanks for the info. Unfortunately customer doesn't have much of a budget. Their snmp software was written in-house and although a simple program it worked well until we upgraded the Cat IOS to fix another problem. If possible, we would like to continue using the existing snmp software however, we now need to look at different IOS outputs "show vlan counters" rather than "show int vlan". Can you suggest anyway for us to achieve this?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...