Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Vlan database vs vlan config, rpr-plus...

We have Catalysts 6500's that we are migrating to native ios mode, and have noticed in the docs (http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_configuration_guide_chapter09186a00800da705.html#wp1095579) that vlan configurations made from the vlan database mode are NOT replicated throught rpr-plus.

While configuration of vlans through the global config mode isn't really a problem for future configs, we haven't found a way to easiliy convert vlan database configs to vlan-config...

Is there such a way besides clearing vlan.dat and starting over?

Also, after doing a clean config of vlans through vlan-config, there doesn't seem to be much (any?) diffrence either in the global config or the presence of the vlan.dat. Is the config supposed to look any diffrent when issued as vlan-config?

TIA

1 REPLY
Silver

Re: Vlan database vs vlan config, rpr-plus...

110
Views
0
Helpful
1
Replies
CreatePlease to create content