You can definetely add user in vlan 10 on sw1 and they will be able to talk to all the users in vlan 10 on sw1 and sw2 but if the layer 3 connection between sw2 and sw3 are in different subnet then the vlan 10 subnet, users in vlan 10 on sw1 and sw2 will not be able to talk to users in vlan 10 on sw3 and neither will be able to hit the gateway because you are doing the intervlan routing on sw3.
If you want that users in vlan 10 on sw1 to talk to its gateway which is SVI vlan 10 on sw3 you have to make the connection between sw2 and sw3 as layer 2 allowing vlan 10 if it is a trunk port or else it shuld be an access posrt with vlan 10.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.