03-20-2004 11:07 AM - edited 03-02-2019 02:26 PM
Hi
I am trying to configure VLANs on my switch. I configure 1 IP addresses to each VLAN interface. for some reason I cannot ping the VLAN2 IP I can only ping VLAN 1.
Both the VLANs have same MAC address, so i tires to change the MAC but it says that this is not supported on 2900.
need help!
thanks
03-20-2004 01:32 PM
Unless it is a L2/L2 capable device such as the 2948G, you will only be able to configure an IP address on the management VLAN.
Hope this helps,
03-20-2004 01:34 PM
I meant L2/L3 of course.
03-20-2004 01:55 PM
One precision. I'm referring to the 2948G-L3.
03-20-2004 09:51 PM
Thank you
03-20-2004 09:51 PM
Thank you
03-20-2004 04:22 PM
I know that on cat 2950s it only supports one vlan, that is a management vlan only. It does not support multiple vlans
Hope this helps
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: