03-20-2004 11:07 AM - edited 03-02-2019 02:26 PM
Hi
I am trying to configure VLANs on my switch. I configure 1 IP addresses to each VLAN interface. for some reason I cannot ping the VLAN2 IP I can only ping VLAN 1.
Both the VLANs have same MAC address, so i tires to change the MAC but it says that this is not supported on 2900.
need help!
thanks
03-20-2004 01:32 PM
Unless it is a L2/L2 capable device such as the 2948G, you will only be able to configure an IP address on the management VLAN.
Hope this helps,
03-20-2004 01:34 PM
I meant L2/L3 of course.
03-20-2004 01:55 PM
One precision. I'm referring to the 2948G-L3.
03-20-2004 09:51 PM
Thank you
03-20-2004 09:51 PM
Thank you
03-20-2004 04:22 PM
I know that on cat 2950s it only supports one vlan, that is a management vlan only. It does not support multiple vlans
Hope this helps
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide