11-14-2003 07:43 PM - edited 03-02-2019 11:43 AM
Hi
We need to setup a 6509 switch to allow inter-vlan routing. We have novell 3.12 and 4.12 server in our infrastructure. The 6509 is installed a MSFC2 and PFC with supervisor engine 1A.
Someone told me that that 6509 is able to forward or route IPX traffic if I have the following module.
Part number: S6MSF2DV-12119E
Best Regards
Raymond Chow
11-15-2003 07:04 AM
Yes, basically what they are saying is you need to run IOS that supports routing of desktop protocols (eg, IPX). If you only have license for 'IP Only' software then you'll need to purchase license for desktop or enterprise software.
11-15-2003 08:13 PM
Can you give me some information about this issue. Is there any other solution if I want to forward IPX packet across 2 vlans with exiting configuration.
I have the following devices
2 x 6509 switches
20 x 3550 switches
40 x novell servers (in different vlan)
300 x pc (in different vlan)
Thanks
Raymond
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide