Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vlan on a stick using a 2621

Can I use a 2621and configure it as a router on stick. I have multiple vlans that I need to route between, but I don't know if the 2600 platform will support it. The attached switches are 2900.

Thanx

LB

4 REPLIES
Cisco Employee

Re: vlan on a stick using a 2621

If you have a fastethernet interface, you should be able to do it. Also make sure you have 2900's which are capable of trunking. The following page should answer your questions

http://www.cisco.com/warp/public/473/50.shtml

New Member

Re: vlan on a stick using a 2621

Thanx alot. That was the answer.

LB

New Member

Re: vlan on a stick using a 2621

Depending on which model of 2900 you have it may only support 802.1Q trunking. For example, I have a 2924 switch which supports ISL and 802.1Q, but I have also a 2950 and it only supports 802.1Q. Make sure the version of IOS that you have can support trunking and can also support the right type.

David.

New Member

Re: vlan on a stick using a 2621

Dave, it is a 2924. I've got the right code and I'm configuring now.

Thanx

LB

91
Views
0
Helpful
4
Replies
CreatePlease to create content