I am going to start setting up vlans on my network. My problem is I have machines in a 255.255.128.0 mask, I want to create the vlans in this .128 mask and not have to move all the machines out of the .128 and back down one at a time. I did get this to work, but I don't want to change half of my 1200 machines and then start having strange problems. I turned proxy-arp on and made some static routes in my last router before the internet so packets no how to get back to the vlans. Thanks for the help and hope this makes sense.
hello rickyt00, i have similar situation on my network with 3550, my subnet is 255.255.128.0, i placed the vlan on 255.255.255.255 but my problem is that internet traffic cann't get to my remote stations that came in through the serial oand out through the e0/0 to the 3550. i can browse on my LAN but my remote stations can not browse...pls kindly assist me with any info. infact i'm planning disabling the 3550 if theres no head way
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.