08-03-2003 06:55 PM - edited 03-02-2019 09:19 AM
Hi, I have 4 VLANs as below;
VLAN1 - 192.168.1.x - a MS windows 2000 Domain Controller(D.C.), an Exchange Mail server and Firewall Proxy (ISA) also reside here.
VLAN2 - 192.168.2.x
VLAN3 - 192.168.10.x
VLAN4 - 192.168.20.x
All users in VLAN 1-4 needs to login to the D.C. in VLAN1 and access the shared files there and also checking mails from another exchange mail server. ISA Firewall in VLAN1 allows all VLAN users to surf Internet.
Q1) So how to solve the problem of NETBIOS (domain name) in order for all the VLAN users to login to the D.C. in VLAN 1 successfully?
Q2) For inter-VLAN routing, if I have a combination of 3COM switch, Cisco Switch and router,how can I perform the ISL encapsulation ???
Q3) Can I use the same subnet for two different VLAN ?
Anyone please help.
08-03-2003 11:07 PM
this will solve your problem,
conf t
int vlan 2
ip helper-address (Address of D.C.)
apply this to all the vlans.
08-06-2003 01:54 AM
Thanks a lot. I had the same problem than this person and thanks to your help I can have my lab working perfectly.
08-03-2003 11:13 PM
Hi,
ad Q1) http://www.cisco.com/warp/customer/473/winnt_dg.htm
should explain
ad Q2) ISL is Cisco proprietary, you need to use 802.1q as standard encapsulation between different vendors devices
ad Q3) This is strongly not recommended, very difficult to configure, dont use it. If it'a ABSOLUTELY necessary, you can use a special NAT configuration, see http://www.cisco.com/warp/customer/556/3.html.
Regards,
Milan
08-04-2003 02:24 AM
Please give us some more details of the Switch Hardware you have and the software versions - 3COM Switch Cisco Switch and router doesn't really help.
Andy
08-06-2003 06:51 AM
I may be mistaken, but if you have Win2k Server and Win2k/XP clients, they don't use NETBIOS for locating the DC or resource location. These newer clients rely on DNS for resource location. If you have older NT clients or something, you could use a WINS server. Also as another poster pointed out, you can use the Cisco ip helper-address command to forward certain UDP broadcasts.
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide