Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VLAN Setup and Configuration Guides

I have one 2950 (SW1) and another 2950 (SW2) both are connected to the GBICs on a chassis switch 4003 (SW3) and form SW2 there is one Gigabit fiber backbone link to another 2950 (SW4).

So if I want to create two VLANs here, VLAN1 for SW1 traffic and VLAN2 for SW2 traffic, both VLANs must reach at SW4.In terms of VLAN configuration, how do I configure it ?

Is there any configuration sample for such scenerio ?

Anyone please help out.

3 REPLIES
New Member

Re: VLAN Setup and Configuration Guides

at the 4003 you do set commands, set vlan 2 3/3

at the 2950 go to the fastethernet interface and type switchport access vlan xxx

hth

Dennis

New Member

Re: VLAN Setup and Configuration Guides

Hi, is there any configuration sample from Cisco website for such scenerio ?

Thanks man.

New Member

Re: VLAN Setup and Configuration Guides

First off I work with switches a lot and I understand it pretty well. As far as configuration examples to should be able to find it on ciscos web site. Just do

search on the 4003 and the 2950.

hth

Dennis

315
Views
0
Helpful
3
Replies