VLAN/Subnet - span across a router

[us10610]

I have 2 Cisco 3550's (3550A & 3550B) seperated by a Cisco 2600. 3550A is connected to our Voice lab on VLAN54 in it's own subnet. I am trying to configure bridging on the 2600 to allow me to put ports on 3550B in VLAN54 and be in the same subnet as 3550A.

Is this possible?

Thanks,

[ekiriakos]

Yes it is possible. Routers can bridge and route at the same time. See link:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm_c/bcfpart1/bcftb.htm

Rgds

E.

[pciaccio]

Try Integrated Routing and Bridging..URL: http://www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080094663.shtml

Good Luck...