cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
615
Views
0
Helpful
3
Replies

VLAN Trunk Port Speed

utawakevou
Level 4
Level 4

Im setting up a test on VLAN and inter-VLAN routing where I use a 2950 and a 1751 router. I have set-up 2 VLAN's from the switch and have trunk one of the port. Using a CAT 5 patch lead, I connect it to the switch trunk port and to the router fastethernet port. I did configure fastethernet0/0.1 and fastethernet0/0.2 and encapsulate it with dot1Q. So far everything are working OK.

Since it is a 10/100 connectivity, I just want to know how will the bandwidth be shared by all the 3 VLANS (VLAN 1 is my management VLAN).

thanks

3 Replies 3

mehrdad
Level 3
Level 3

there isn't any sharing

Then what is the bandwidth of one VLAN ? is it up to 100Mbps ??

yes up to 100Mbps (there is a little 802.1q overhead, four octets to each frame http://www.zyxel.com/support/supportnote/ies1000/image/8021q.gif)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco