Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VLAN Trunk Port Speed

Im setting up a test on VLAN and inter-VLAN routing where I use a 2950 and a 1751 router. I have set-up 2 VLAN's from the switch and have trunk one of the port. Using a CAT 5 patch lead, I connect it to the switch trunk port and to the router fastethernet port. I did configure fastethernet0/0.1 and fastethernet0/0.2 and encapsulate it with dot1Q. So far everything are working OK.

Since it is a 10/100 connectivity, I just want to know how will the bandwidth be shared by all the 3 VLANS (VLAN 1 is my management VLAN).

thanks

3 REPLIES
Bronze

Re: VLAN Trunk Port Speed

there isn't any sharing

New Member

Re: VLAN Trunk Port Speed

Then what is the bandwidth of one VLAN ? is it up to 100Mbps ??

Bronze

Re: VLAN Trunk Port Speed

yes up to 100Mbps (there is a little 802.1q overhead, four octets to each frame http://www.zyxel.com/support/supportnote/ies1000/image/8021q.gif)

403
Views
0
Helpful
3
Replies