Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VLAN

Hi,

I am having a cisco 3750 switch in which 2 vlans are configured: vlan2 and vlan3. Ports 1 to 11 are in vlan2 and port 12 in vlan3. The ports in vlan 2 is connected to the hosts and port 12 (vlan3) is connected to Cisco Pix 535 and to the server farm. How is it possible to get the connection done between the hosts and servers in this scenario ? How I can establish the communication between the two vlans ?

Thanks & Regard,

Harsh.

3 REPLIES

Re: VLAN

Hi Harsh,

The 3750 is a layer 3 switch. You can create SVI for the vlans and the switch will take care of the intervlan routing.

Ip routing

int vlan 2

ip address

int vlan 3

ip address

HTH

Narayan

Bronze

Re: VLAN

hi

Cisco 3750 is support Layer 3 Functionality, so you need to configure SVI , it will support intervlan routing .

-Minu

Re: VLAN

Hi Harsh,

In addition to the post by royalblues, You have to add static routes on your 3750 for the server farm subnet and the a static route on PIX for the vlan 2 hosts.

Another thing that you have to do is to allow the hosts from the vlan 2 to access the servers and also the ACLS to allow the traffic to the server and back to the hosts.

HTH, Please rate if it does.

-amit singh

107
Views
0
Helpful
3
Replies