I am implementing a Vlan on a flat network, I will have the Servers on their own subnet while having the clients on their own subnet, how would I go about making sure dhcp is being handed out to all the clients? Do I need to enable dhcp relay? Or what would be the process for this? The router is a 7206.
Configure 'ip helper-address (dhcp_address)' on the vlan interface connected to clients. The router would forward the client broadcasts as a unicast message to the DHCP server and everything should fly.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...