I have a 1721 running feature set c1700-k9o3sy7-mz.122-15.T8.bin
I have some subinterfaces configured for dot1q vlan encapsulation. I've loaded the same IOS version on a 1720 at tried the same operation
Can anyone tell me why I can setup vlans on a 1721 and not a 1720 when loaded up with the same version of IOS?
I know the 1720 has been EOL'd but dot1q vlans is such a trivial/common feature these days. The IOS version and feature set is EXACTLY the same. From what I know the 1720 ad 1721 aren't THAT different.
I'm just kinda ticked that Cisco has to stagger their product offerings so ridgedly in order to squeeze people into hardware upgrades..
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...